Netgear RP114 Fiche technique télécharger pdf (Page 26)

Reference Guide for the Model RP114 Web Safe Router

2-2 Setting Up the Hardware

Local Network Hardware Requirements

The Model RP114 Web Safe Router is intended for use in a network of personal computers (PCs)

that are interconnected by twisted-pair Ethernet cables.

PC Requirements

To install and run the Model RP114 router over your network of PCs, each PC must have the

following:

• An installed Ethernet Network Interface Card (NIC).

• A connection to the network via a hub or switch. If all PCs on the network will not run at the

same speed (10 Mbps or 100 Mbps), you need to use a dual-speed hub or switch. The Model

RP114 router provides a 4-port switch capable of either 10 Mbps or 100 Mbps operation.

Links operating at 100 Mbps must be connected with Category 5 cable.

Access Device Requirement

The shared broadband access device (cable modem or DSL modem) must provide a standard

10BASE-T Ethernet interface.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 153 154

Pas de commentaire

Netgear RP114 Fiche technique Page 26