Netgear GS524T Manuel d'utilisateur télécharger pdf (Page 21)

troubleshooting 5-2

Network Adapter Cards

Make sure the network adapter cards installed in the PCs are in working condition

and the software driver has been installed.

Configuration

If problems occur after altering the network configuration, restore the original con-

nections and determine the problem by implementing the new changes, one procedure

at a time. Make sure that cable distances,repeater limits,and other physical aspects

of the installation do not exceed the Ethernet limitations.

Switch Integrity

If required,verify the integrity of the switch by resetting the switch.Turn power to the

switch off and then back on.If the problem continues and you have completed all the

preceding diagnoses,contact your NETGEAR point-of-sale representative.

Auto Negotiation

Each port will negotiate the correct duplex mode and speed, provided the link partner

supports auto negotiation. If the link partner does not support auto negotiation,only

the speed will be determined correctly and the duplex mode will default to half.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 33 34

Pas de commentaire

Netgear GS524T Manuel d'utilisateur Page 21