Netgear WPNT121 Guide de l'utilisateur télécharger pdf (Page 42)

NETGEAR RangeMax™ 240 Wireless USB 2.0 Adapter WPNT121 User Manual

4-2

v1.0, March 2006

The Smart Wizard keeps asking me to save my settings

This is because you have made changes to the settings and the Smart Wizard is offering you the

chance to save the changes. If you want to avoid these Profile setting prompts, simply click Apply

before you close the Smart Wizard.

Ad Hoc mode is not working correctly

You need to click the Initiate Ad Hoc button before you click Apply. Here is how you start an Ad

Hoc network:

1. Fill in the Network Name (SSID).

2. Select the Computer-to-Computer (Ad Hoc) Network Type.

3. Click Initiate Ad Hoc.

4. Accept the default settings or make your changes and click OK

5. Click Apply.

How to use the wireless configuration utility that comes with Windows XP

During the software installation the wizard prompts you to choose either the NETGEAR Smart

Wizard or the Windows configuration utility. Be sure the Wireless USB 2.0 Adapter is connected

to the USB port in the computer and follow these instructions to change your selection.

1. Go to Control Panel and select Network Connections.

2. Right click on the connection and select Properties.

3. Click the Wireless Networks tab.

4. Select or clear the WPNT121 “Use Windows to configure my wireless network settings”

check box.

Did the Wireless USB 2.0 Adapter receive a valid IP address from the Wireless

Router/AP?

The easiest way is to click the System Tray icon to open the Wireless USB 2.0 Adapter Smart

Wizard. Then check the IP address in the About page.

Note: Be sure all computers in your Ad Hoc network are configured with static IP

addresses in the same subnet.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 48

Pas de commentaire

Netgear WPNT121 Guide de l'utilisateur Page 42