Netgear GS728TPP Manuel d'utilisateur télécharger pdf (Page 45)

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

PoE Port Configuration

Use the PoE Port Configuration screen to configure per-port PoE settings.

 To assign a timer to the port:

1. Select System

 PoE  Advanced  PoE Port Configuration.

The following screen displays:

2. Select the check box next to one or more interfaces.

3. Configure the settings:

• Admin Mode. Enables or disables the ability of the port to deliver power.

• Priority Level. Determines which ports can deliver power if the total power delivered

by the switch crosses a certain threshold.

The switch might not be able to supply

power to all connected devices. Priority is used to determine which ports can supply

power. When ports have the same priority, the lower numbered port is given a higher

priority.

• High Power Mode. 802.3at for each port.

• Class. Displays the class of the powered device (PD) connected to the port.

The

classes define the range of maximum power output that the switch generates. The

Threshold Power Indicates a power threshold percentage. In order to give power to an

additional port, the consumed power must be below the threshold.

Consumed Power

Displays the amount of power the system can consume before the system

does not provide power to an additional port.

Field Description

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 276 277

Pas de commentaire

Netgear GS728TPP Manuel d'utilisateur Page 45