Netgear GS510TP Manuel d'utilisateur télécharger pdf (Page 13)

Physical Description

NETGEAR GS510TP Smart Switch

LED Designations

Port LEDs

Table 1 describes the RJ-45 and SFP port LED designations. There are two LEDs for each

RJ-45 port.

Table 1. Port LEDs

LED Designation

Speed/Link/Activity SPD/Link/ACT LED:

• Off = No link is established on the port.

• Solid Green = A valid 1000 Mbps link is established on the port.

• Blinking Green = Packets transmission or reception is occurring on

the port at 1000 Mbps.

• Solid Yellow = A valid 10/100 Mbps link is established on the port.

• Blinking Yellow = Packets transmission or reception is occurring on

the port at 10/100 Mbps.

PoE Status PoE Status LED:

• Off = No PoE powered device (PD) connected.

• Solid Green = The PoE powered device is connected and the port is

supplying power successfully.

• Solid Yellow = Indicates one of the following failures resulted in

stopping power to that port:

Short circuit on PoE power circuit

PoE power demand exceeds power available

PoE current exceeds PD’s classification

Out of proper voltage band (44 ~ 57 VDC)

SFP Port Indicate LED • Off = No link is established on the port.

• Solid Green = A valid link is established on the port.

• Flashing Green = Packet transmission or reception is occurring on

the port.

Each SFP port has its own indication LED.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Pas de commentaire

Netgear GS510TP Manuel d'utilisateur Page 13